EL Products

 LED RGB controller - full color drivers

MODEL: RX-DM-C01-2

RX-DM-C01-2  is a waterproof  multi function LED controller is a universal RGB controller with high-performance, adopted the most advanced PWM control technology, and also can adjust the brightness far away by the RF wireless controller. It’s dedicated to control entire RGB color changes of LED lights with 4 wires (common anode), such as RGB LED module, LED strip, LED tape, LED wall washer, floodlight, LED under water lamp and other LED lights.

LED controller

MODEL: RX-CD12-01

Electronical Specifications:

Input Voltage:DC 12V / 24V

Input Red wire : DC+

Max Power : 96W / channels / 12V

Output  black wire :  anode

Output signal : PWM

Output Current: Max 4A

Mechanical  Specifications:

Host Dimensions :  90x70x28mm

Remote control Dimensions: 88x33x5.8mm

Single packing: 146x96x50mm   Weight: 170

Operating Temperature:  -20℃~60℃

RX-CD12-01

It functions gracefully with 12VDC LED products, and can handle up to 8 amps of current for each channel. With the Color Controller there are several RGB changing modes available and each mode has sixteen speeds that can be adjusted wirelessly.

This RGB LED controller has memory! This means that you can cut the power to the unit and it will never forget the last function.

RGB LED Controller
Has memory!

quiescent state Adjustable brightness, adjustable dynamic speed
Infra-red remote included

Product Description
Our full Color Controller is a RGB LED control unit which can change color of  LEDs in many different modes.
1. Static Red ,
2. Static Blue ,
3. Static yellow
4. Static pink
5. Static white
6. Static green
7. Static Cyan
8. Three color jumpy changing
9. Seven color jumpy changing

10. Three color gradual changing
11. Seven color gradual changing

It can work with RGB LED Flexible Lights or any million color fixture using both 3 channels and has a common positive (common anode).
 

LED controller

MODEL: RX-CD20A

RGB LED Controller
Has memory!

Adjustable dynamic speed
Wireless remote included

It can work with RGB LED Flexible Lights or any million color fixture using both 3 channels and has a common positive (common anode).

Electronical Specifications:

Input Voltage:DC 12V / 24V

Max Power : 96W / channels / 12V

Output signal : PWM

Output Current: Max 8A

Mechanical  Specifications:

Host Dimensions :  103x65x25mm

Remote control Dimensions: 88x33x5.8mm

Single packing: 146x96x50mm   Weight: 210

Operating Temperature:  -20℃~60℃

Waterproof LED controller

MODEL: RX-RGB-T

note:

Two options ： common anode / Common cathode circuit

1.High stability of the IC

2.Waterproof: IP67/8

3.Wireless  remote controller

4.Static 7 color

5.7 color flash and 7 color gradual-change

6.Long lifespan：≥30000hrs

7.flashing speed adjustable.

Electronical Specifications:

Input Voltage:12VDC  

Output Max: 3A / channels

Three output for RGB LED

Continuous gradient, 7 color changing

Common anode / (Common cathode circuit)

Mechanical  Specifications:

Dimensions : L 82mm W 66mm H 28mm

Weight: 130g

Wire Length：input 200cm, output 100cm

Operating Temperature:  -20℃~60℃

Waterproof LED controller

MODEL: RX-RGB-Y

1.High stability of the IC

2.Output signal : PWM

3.Waterproof: IP67

4.Easy to install   power-on flash

5.No RF interference

6.Small size and Transparent.

7.Long lifespan: ≥30000hrs.

8.Multi-Color Gradient Blending

Electronical Specifications:
Input Voltage:12VDC
Output : Max  1A / channels
Three output for RGB LED
Power-on circulating flashing

Common cathode circuit

Mechanical Specifications:
Dimensions : high:18mm, diameter:32mm
Weight: 25g
Wire Length: input 180cm, output 100cm
Operating Temperature: -20℃~60℃
 

 Related Products

 LED controller-RGB amplifier

LED dimmer